Página 2 de 2
Re: Atari 2600 VGA
Publicado: 29 Ago 2016, 13:03
por Turrican
I´ve tested this core yesterday and it worked very well.
The only think is that the Atari joystick didn´t work.
The fire button does not work... but using a Mega Drive gamepad it worked well, with the firebutton on C button.
Re: Atari 2600 VGA
Publicado: 29 Ago 2016, 14:36
por antoniovillena
Re: Atari 2600 VGA
Publicado: 02 Sep 2016, 15:39
por Turrican
Hi Antonio.
I´ll try today.
Thanks!
Re: Atari 2600 VGA
Publicado: 04 Sep 2016, 18:53
por Turrican
Hmmm... how do I upgrade using a .ZX1 file?
Re: Atari 2600 VGA
Publicado: 04 Sep 2016, 19:33
por antoniovillena
Turrican escribió:
Hmmm... how do I upgrade using a .ZX1 file?
Copy CORE6.ZX1 into SD card. Enter BIOS, upgrade section. Find machine with a number "6" in the right. Select and then "SD upgrade".
Re: Atari 2600 VGA
Publicado: 04 Sep 2016, 23:56
por Turrican
Hi Antonio.
It says: "Not found or bad size"
Re: Atari 2600 VGA
Publicado: 05 Sep 2016, 00:16
por antoniovillena
Turrican escribió:Hi Antonio.
It says: "Not found or bad size"
Probably you have an old firmware. What is your version? If is less than v0.48 I suggest to follow these instructions:
viewtopic.php?f=38&t=468
Re: Atari 2600 VGA
Publicado: 05 Sep 2016, 00:19
por Turrican
0.50
Re: Atari 2600 VGA
Publicado: 05 Sep 2016, 00:27
por antoniovillena
Turrican escribió:0.50
You have new firmware. Something must be wrong:
- SD card is not FAT formated.
- You have not the file CORE6.ZX1 in the root folder of the SD card.
- You have not selected 6th core in the upgrade menu. Cores has a number on the right part, starting in 2.
Re: Atari 2600 VGA
Publicado: 05 Sep 2016, 00:51
por Turrican
Hi Antonio. I´ve downloaded the TAP version and it´s working.
Thanks!
I´ll try ZX1 file next time.