You'll need the SE Basic IV core to run these apps. After you install them in the PROGRAMS folder, you run them using their folder name (without spaces). For example, run"2019".
2019: A native version of this video: https://vimeo.com/381016257
Aardman: 30FPS / 15KHz DMA demo
Bad Apple!!: A port of the Uno demo 30FPS / 15KHz
Kayahara: The classic spinning dancer, now at 30FPS
The Last V8: TurboSound demo, now at 60Hz
SCR Slide Show: Timex 8x1 / ULAplus image viewer, now hold SPACE to pause or tap to advance
Skyfall: TurboSound demo at 60Hz
Take On Me: 30FPS / 15KHz DMA demo
VDP test: The classic VDP test, now hold SPACE to pause or tap to advance
Note: The DMA demos use a lot of bandwidth. You will experience distortion on all but the fastest SD cards. You may want to use a defrag tool on the MVZ files.
There is also a new version of the Timex TC2048 emulator bundled with the ZX-Uno install pack in SE Basic IV. It sets all of the configuration so that you should be able to run any software written for the Uno without having to swap ROMs in the BIOS. For example, it enables the divMMC NMI, Radastan mode and so on.