Hello!
I've received ZX-Uno and tried to flash Core with uart support.
I've downloaded from topic abount YomboFTP EXP26 version of core. Renamed as CORE2.ZX1 and flashed it via BIOS. But it goes to endless reboot cycle.
ZX-Uno 4.2 with 512K ram.
Flashing UART core
Flashing UART core
My hardware:
ZX Uno 4.2, +UNO, ZX-Evolution Rev. C+VDac+ZXM-SoundCard Extreme+ZiFi, Harlequin 128K, Reverse U8, Leningrad 48K
My blog(and there gopher server on 70th port): https://nihirash.net/
ZX Uno 4.2, +UNO, ZX-Evolution Rev. C+VDac+ZXM-SoundCard Extreme+ZiFi, Harlequin 128K, Reverse U8, Leningrad 48K
My blog(and there gopher server on 70th port): https://nihirash.net/
- antoniovillena
- Mensajes: 2621
- Registrado: 27 Sep 2015, 20:41
Re: Flashing UART core
This endless reboot cycle is normal. You must choose the core manually. There is no way to avoid this endless cycle without replacing the main zx spectrum core.nihirash escribió:Hello!
But it goes to endless reboot cycle.
Re: Flashing UART core
I've selected it from bios. I think in my experiments i've downgraded even main speccy coreantoniovillena escribió:This endless reboot cycle is normal. You must choose the core manually. There is no way to avoid this endless cycle without replacing the main zx spectrum core.nihirash escribió:Hello!
But it goes to endless reboot cycle.
I've cloned your repo zxuno and tried to make full flash image "flash.zx1" with replaced one core to Uart-supported.
I think there some goes wrong
My hardware:
ZX Uno 4.2, +UNO, ZX-Evolution Rev. C+VDac+ZXM-SoundCard Extreme+ZiFi, Harlequin 128K, Reverse U8, Leningrad 48K
My blog(and there gopher server on 70th port): https://nihirash.net/
ZX Uno 4.2, +UNO, ZX-Evolution Rev. C+VDac+ZXM-SoundCard Extreme+ZiFi, Harlequin 128K, Reverse U8, Leningrad 48K
My blog(and there gopher server on 70th port): https://nihirash.net/