Presentación en Reddit del modelo OPEN HARDWARE I/O BOARD ATLAS MINI:

Otras placas, clones o aparatos basados en FPGA / Oher FPGA based clones/devices/boards
Subcritical
Mensajes: 17
Registrado: 19 May 2019, 22:04

Presentación en Reddit del modelo OPEN HARDWARE I/O BOARD ATLAS MINI:

Mensaje por Subcritical » 26 May 2023, 16:27

Open hardware from Easyeda with the I/O Board Atlas Mini:

Imagen

https://oshwlab.com/subcritical/carrier ... _mini_copy

Kicad proyect:

https://github.com/AtlasFPGA/BASECARRIERBOARDATLAS

Note: The easyeda proyect is the only pcb that has screen printed I/O signals.

Those are the last retro-cores that have been developed/ported in the platform by u/somhi using DeMiSTify.

Arquimedes: https://github.com/AtlasFPGA/archimedes

C64: https://github.com/AtlasFPGA/c64_DeMiSTify

PC_XT: https://github.com/AtlasFPGA/PCXT_DeMiSTify

BBC: https://github.com/AtlasFPGA/BBC_DemiSTify

MISTery: https://github.com/AtlasFPGA/MiSTery

GAMEBOY: https://github.com/AtlasFPGA/gameboy

Some times is needed the I/O BOARD ATLAS + CYC1000, with or without VGA64 module.

Extraida información del enlace:
https://www.reddit.com/r/FPGA/comments/ ... 00_in_the/

Responder