MegaDrive controller Modification for ZX-Uno

Discursiones en general sobre el proyecto que no tienen cabida en otro foro / General discussion for uncateorized topics about the ZX-Uno project
firepower
Mensajes: 23
Registrado: 19 Sep 2020, 16:44

MegaDrive controller Modification for ZX-Uno

Mensaje por firepower » 13 May 2021, 17:06

To modify MegaDrive controller (cheap chinese clone with glob chip) you need to wire pin 7 to pin 5 inside controller (red circle)
and wire A and B buttons together for Fire 1 (or you can just use only B button for Fire1) (orange circle)
C button is Fire 2
IMG_20210513_221255.jpg
Test on XZ-Uno 2M VGA

This is the pinout of the MegaDrive Controller connector:

(Select = GND)
1 Up
2 Down
3 Gnd
4 Gnd
5 5V
6 TL (Button A)
7 TH (Select)
8 GND
9 TR (Button Start)

(Select = 5V)
1 Up
2 Down
3 Left
4 Right
5 5V
6 TL (Button B)
7 TH (Select)
8 Gnd
9 TR (Button C)
ZX-Uno 2M VGA
Hanoi, Vietnam

Responder