ZX-Next core para ZX-Uno

fbelavenuto
Mensajes: 100
Registrado: 08 Sep 2016, 13:10

Re: ZX-Next core para ZX-Uno

Mensaje por fbelavenuto » 01 Feb 2017, 11:08

It is possible, at any time I can do this.
Higgy escribió:Does this core include Turbosound? - The final ZX Next will, but I don't think this core does.

Thanks

Avatar de Usuario
Higgy
Mensajes: 63
Registrado: 30 Dic 2016, 23:57
Ubicación: Oxfordshire, England
Contactar:

Re: ZX-Next core para ZX-Uno

Mensaje por Higgy » 01 Feb 2017, 13:31

If you could release an new CORE that would be great 8-)

I have a question, I was looking at some of the demos that were shown on the Next development board.

On the demo 'E' https://www.youtube.com/watch?v=9nD6IzMS6Ls at 1min 36 sec there is the picture of a Bus.
I am sure the graphics were more pixelated using the TBBlue Core? (Maybe the Next supports other additional modes?)

I tried on the ZX Uno with the Pentagon core and the Bus picture looked fine like the Youtube demo.

(to load I am just using 'NMI' then opening the .TRD file. I then select the 1st file in the TRD file browser. I am not typing anything in.)

Thanks

Avatar de Usuario
aowen
Mensajes: 178
Registrado: 07 Oct 2015, 13:32

Re: ZX-Next core para ZX-Uno

Mensaje por aowen » 08 Feb 2017, 22:19

fbelavenuto escribió:The ROM is loaded from the SD Card, any ROM can be put into the card by the user.
That answers my question. Thanks.

Avatar de Usuario
Higgy
Mensajes: 63
Registrado: 30 Dic 2016, 23:57
Ubicación: Oxfordshire, England
Contactar:

Re: ZX-Next core para ZX-Uno

Mensaje por Higgy » 15 Feb 2017, 14:38

I took a photo of the screen I was talking about. This is what it looks like using TBBlue Core (128K mode with ULA+ on):
Using TBBlue Core
Using TBBlue Core
On the ZX Next demo the picture looked fine?

fbelavenuto
Mensajes: 100
Registrado: 08 Sep 2016, 13:10

Re: ZX-Next core para ZX-Uno

Mensaje por fbelavenuto » 16 Feb 2017, 00:31

Strange!! Here is fine (ZX-Uno and Next)!
Higgy escribió:I took a photo of the screen I was talking about. This is what it looks like using TBBlue Core (128K mode with ULA+ on):
E.jpg
On the ZX Next demo the picture looked fine?

Avatar de Usuario
desUBIKado
Mensajes: 1002
Registrado: 05 Ago 2016, 22:33

Re: ZX-Next core para ZX-Uno

Mensaje por desUBIKado » 16 Feb 2017, 17:19

Higgy escribió:I took a photo of the screen I was talking about. This is what it looks like using TBBlue Core (128K mode with ULA+ on):
E.jpg
On the ZX Next demo the picture looked fine?
I have try it on ZX-Uno too , and saw it perfect. I checked with 128K mode with ULA+ on, 50Hz and 60Hz, and both of them OK

Avatar de Usuario
Higgy
Mensajes: 63
Registrado: 30 Dic 2016, 23:57
Ubicación: Oxfordshire, England
Contactar:

Re: ZX-Next core para ZX-Uno

Mensaje por Higgy » 16 Feb 2017, 20:22

I tried again also with Multiface and Ena Turbo OFF and the picture still has problems. I am using 50Hz SCART.

Can you attach your 'E' version or link to it please?

@fbelavenuto - how is the Turbosound version going ;)

Avatar de Usuario
desUBIKado
Mensajes: 1002
Registrado: 05 Ago 2016, 22:33

Re: ZX-Next core para ZX-Uno

Mensaje por desUBIKado » 16 Feb 2017, 22:11

Higgy escribió:I tried again also with Multiface and Ena Turbo OFF and the picture still has problems. I am using 50Hz SCART.

Can you attach your 'E' version or link to it please?

@fbelavenuto - how is the Turbosound version going ;)
Hi Higgy

Tested on ZX-Uno, with VGA and SCART, and the demo works fine.

My version of "E" demo is inside of svn server of ZX-Uno project: http://svn.zxuno.com/svn/zxuno/software/trd/E.trd [User:guess guest Pass: zxuno]
Última edición por desUBIKado el 16 Feb 2017, 23:51, editado 1 vez en total.

Avatar de Usuario
Uto
Mensajes: 1394
Registrado: 17 Dic 2015, 16:39

Re: ZX-Next core para ZX-Uno

Mensaje por Uto » 16 Feb 2017, 23:20

desUBIKado escribió: [User:guess Pass: zxuno]
"guest", not guess :-)

Avatar de Usuario
desUBIKado
Mensajes: 1002
Registrado: 05 Ago 2016, 22:33

Re: ZX-Next core para ZX-Uno

Mensaje por desUBIKado » 16 Feb 2017, 23:53

Uto escribió:
desUBIKado escribió: [User:guess Pass: zxuno]
"guest", not guess :-)
fixed :gracias!:

Responder