Log of development zx-uno network tools.

Software para o relacionado con el core ZX Spectrum / Software for or related to the ZX Spectrum core
Avatar de Usuario
yombo
Mensajes: 487
Registrado: 05 Oct 2015, 14:10

Re: Log of development zx-uno network tools.

Mensaje por yombo » 30 Jun 2019, 23:15

Grandes! :plasplas: :plasplas: :plasplas:

nihirash
Mensajes: 110
Registrado: 04 May 2019, 00:55
Contactar:

Re: Log of development zx-uno network tools.

Mensaje por nihirash » 04 Jul 2019, 22:45

Gopher client now uses turbo mode on rendering and works smoothie :D

You may download it here: https://github.com/nihirash/uGoph/releases

Or update via my gopher page(just download file - it overwrites existings) and restart client.
My hardware:
ZX Uno 4.2, +UNO, ZX-Evolution Rev. C+VDac+ZXM-SoundCard Extreme+ZiFi, Harlequin 128K, Reverse U8, Leningrad 48K

My blog(and there gopher server on 70th port): https://nihirash.net/

Avatar de Usuario
desUBIKado
Mensajes: 1002
Registrado: 05 Ago 2016, 22:33

Re: Log of development zx-uno network tools.

Mensaje por desUBIKado » 05 Jul 2019, 22:35

Ya he actualizado el cliente Gopher a la nueva versión y el turbo le sienta muy bien. Se nota más rapidez en la respuesta en el desplazamiento del cursor, y en el servidor Gopher nihirash.net de Alex se puede descargar ahora un montón de programas de Virtual TR-DOS (https://vtrd.in/)

Avatar de Usuario
yombo
Mensajes: 487
Registrado: 05 Oct 2015, 14:10

Re: Log of development zx-uno network tools.

Mensaje por yombo » 07 Jul 2019, 15:31

I've corrected a problem in the uart and now, according to some tests by nihirash, all programs with uart work at 14 MHz (Turbo X4) And some of them (IRC) work at 28 MHz.

Here it is the latest EXP26 with corrected UART:
Adjuntos
EXP26_WiFiTurbo_new_pinout_green_pcbs.zip
(106.92 KiB) Descargado 280 veces
EXP26_WiFiTurbo_old_pinout_yellow_pcbs.zip
(107.07 KiB) Descargado 261 veces

weirdocollector
Mensajes: 17
Registrado: 24 May 2016, 14:55

Re: Log of development zx-uno network tools.

Mensaje por weirdocollector » 07 Jul 2019, 23:31

yombo escribió:I've corrected a problem in the uart and now, according to some tests by nihirash, all programs with uart work at 14 MHz (Turbo X4) And some of them (IRC) work at 28 MHz.

Here it is the latest EXP26 with corrected UART:
Which one will work with the ZX UNO GO+?

Thanks!

Avatar de Usuario
yombo
Mensajes: 487
Registrado: 05 Oct 2015, 14:10

Re: Log of development zx-uno network tools.

Mensaje por yombo » 08 Jul 2019, 08:00

weirdocollector escribió:
yombo escribió:I've corrected a problem in the uart and now, according to some tests by nihirash, all programs with uart work at 14 MHz (Turbo X4) And some of them (IRC) work at 28 MHz.

Here it is the latest EXP26 with corrected UART:
Which one will work with the ZX UNO GO+?

Thanks!
The "new pinout". All pcb sold by Antonio (green pcbs) should use this one.
The old pinout (yellow pcbs) were made by me and only few have them.

Avatar de Usuario
desUBIKado
Mensajes: 1002
Registrado: 05 Ago 2016, 22:33

Re: Log of development zx-uno network tools.

Mensaje por desUBIKado » 08 Jul 2019, 19:38

yombo escribió:I've corrected a problem in the uart and now, according to some tests by nihirash, all programs with uart work at 14 MHz (Turbo X4) And some of them (IRC) work at 28 MHz.

Here it is the latest EXP26 with corrected UART:
Me está funcionando un poco raro. Hay muchas veces que no me conectaba con PLATOUNO y con IRC a los servidores. Al final parece que va mejor si lo primero que hago nada más arrancar el core es ejecutar .esprst en 3.5 MHz, luego pasar a 14 MHz con .zxunocfg -s2 y finalmente cargar PLATOUNO o IRC.

El IRC a 28Mhz no me funciona y a 14 MHz sí.

Avatar de Usuario
yombo
Mensajes: 487
Registrado: 05 Oct 2015, 14:10

Re: Log of development zx-uno network tools.

Mensaje por yombo » 08 Jul 2019, 20:04

desUBIKado escribió:
yombo escribió:I've corrected a problem in the uart and now, according to some tests by nihirash, all programs with uart work at 14 MHz (Turbo X4) And some of them (IRC) work at 28 MHz.

Here it is the latest EXP26 with corrected UART:
Me está funcionando un poco raro. Hay muchas veces que no me conectaba con PLATOUNO y con IRC a los servidores. Al final parece que va mejor si lo primero que hago nada más arrancar el core es ejecutar .esprst en 3.5 MHz, luego pasar a 14 MHz con .zxunocfg -s2 y finalmente cargar PLATOUNO o IRC.

El IRC a 28Mhz no me funciona y a 14 MHz sí.
Igual es porque las versiones del soft que tienes ponen turbo en el dibujado y lo quitan en la conexión. No sé si el valor establecido por .zxunocfg se conserva.

Nihirash ha probado estableciendo el turbo directamente en su programa, o eso creo.

Avatar de Usuario
desUBIKado
Mensajes: 1002
Registrado: 05 Ago 2016, 22:33

Re: Log of development zx-uno network tools.

Mensaje por desUBIKado » 08 Jul 2019, 20:38

Yo creo que tengo las últimas versiones de IRC y de PLATOUNO

Avatar de Usuario
yombo
Mensajes: 487
Registrado: 05 Oct 2015, 14:10

Re: Log of development zx-uno network tools.

Mensaje por yombo » 08 Jul 2019, 20:45

desUBIKado escribió:Yo creo que tengo las últimas versiones de IRC y de PLATOUNO
Pues he probado y me pasa como a ti, si no inicializo el wifi primero a turbo X2 o menos, nada. Y de todas formas esxdos no funciona a 28.

Responder