ZX-Uno

vlad escribió:

brunosilva escribió:i have some questions and problems :X

What's the problem?

Hi vlad

About 30 spanish users have bought this board (see pictures in the post):

viewtopic.php?f=27&t=2093

It has the same FPGA than ReVerSE-U16, so porting cores can't be very difficult so we must output VGA instead HDMI. If you like this project I can send you an addon board for free, without obligation to port any core.

antoniovillena escribió:

vlad escribió:

brunosilva escribió:i have some questions and problems :X

What's the problem?

Hi vlad

About 30 spanish users have bought this board (see pictures in the post):

viewtopic.php?f=27&t=2093

It has the same FPGA than ReVerSE-U16, so porting cores can't be very difficult so we must output VGA instead HDMI. If you like this project I can send you an addon board for free, without obligation to port any core.

Todavia hay disponible?


Sent from my iPhone using Tapatalk

lguilherme escribió:Todavia hay disponible?

No sé si te refieres al ReVerSE-U16 o al UnAmiga. Si es el segundo, sí hay. Apúntate en este hilo: viewtopic.php?f=27&t=2078

@vlad - can you check the questions in page 2 of this thread?

brunosilva escribió:can you check the questions in page 2 of this thread?

- Do I need to always write the VNC2 each time I program i diferent core? If so, where can i get the programmer?
Not necessary.

- Is there any place with instructions for the cores? github has some but not all (i think).
Maybe someone will help me with the description.

- if I press F2 (GFX256) I get a strange image.
Yes, that's as it should be, you disconnect the GFX layer, try this in the game to turn off the coloring.

- if I press F3 (NMI) I get an image.
F3 NMI is planned for divMMC in the new core version SPEC256.

- Atari800. Keyboard is unresponsive, displays many letters, etc... do I need to write vnc2 file?
I'll try to fix it.

- Quad_Speccy. tried two tv and one computer monitor and it doesnt display image (one of them says unsupported). I there anything I can do?
I saw that the core says: 720x480@60Hz HDMI Audio 2Ch 32kHz but i've tried u16_hdmi_test_720x480@60hz and it works...


- RK86. I get a screen full of letters.
Yes, it is, the old version of the keyboard receiver. I can fix it.

vlad escribió:
- Do I need to always write the VNC2 each time I program i diferent core? If so, where can i get the programmer?
Not necessary.

- Is there any place with instructions for the cores? github has some but not all (i think).
Maybe someone will help me with the description.

- if I press F2 (GFX256) I get a strange image.
Yes, that's as it should be, you disconnect the GFX layer, try this in the game to turn off the coloring.

- if I press F3 (NMI) I get an image.
F3 NMI is planned for divMMC in the new core version SPEC256.

- Atari800. Keyboard is unresponsive, displays many letters, etc... do I need to write vnc2 file?
I'll try to fix it.

- Quad_Speccy. tried two tv and one computer monitor and it doesnt display image (one of them says unsupported). I there anything I can do?
I saw that the core says: 720x480@60Hz HDMI Audio 2Ch 32kHz but i've tried u16_hdmi_test_720x480@60hz and it works...

phpBB [media]

- RK86. I get a screen full of letters.
Yes, it is, the old version of the keyboard receiver. I can fix it.

Hello Vlad, I would like to buy a Reverse board from you. It is possible?

BCH escribió:I would like to buy a Reverse board from you. It is possible?

Yes it is possible. Unfortunately, I'm the only one who is engaged in the ReVerSE-U16 support. I want to immediately warn you that the ReVerSE-U16 lags far behind MiST and similar motherboards in terms of configurations. I advise you to carefully make a decision before buying.

well... i like the board...
you can only have one core at once and you have to use usb blaster to change cores...
i dont really care... its nice

i only need to solve some issues with some cores... and its a nice project

brunosilva escribió:i only need to solve some issues with some cores... and its a nice project

Theoretically the change of configurations can be made from the OSD menu, for example as in NES:



For example, configurations can be stored on SPIFLASH on a U16, SD cart, or USB FLASH card. But for this, I need to modify the menu and write a driver to work with FAT32 ...
But, in the beginning I have to correct the configuration about which wrote brunosilva.

I only bought this because of quad spectrum... nothing more

but of course... i've tried all the cores that board can do