Página 4 de 4

Re: DAC 18 bits (VGA) + Wifi

Publicado: 20 Feb 2018, 20:09
por yombo
SevenFFF escribió:Thanks yombo. I will try first with your Test_24 in an alternate core. My project needs EXP25 or above, so I will need to build EXP25 or EXP26 eventually :)
Good luck :ordenata:

Re: DAC 18 bits (VGA) + Wifi

Publicado: 20 Feb 2018, 22:11
por SevenFFF
yombo escribió:Good luck :ordenata:
I needed it!

I updated CORE31.ZX1 with this. Is it the correct core?

Now it doesn't boot. I get a repeated bios boot screen screen and red LED, every 5 secs. There is no error message.

It's the first time I updated an alternate core, but it said it worked successfully. How can I troubleshoot this?

My main core is EXP25 and bios is 0.64.

Re: DAC 18 bits (VGA) + Wifi

Publicado: 20 Feb 2018, 22:47
por SevenFFF
I also tried with https://github.com/yomboprime/zxuno-add ... /COREn.ZX1, this doesn't boot either :(

Re: DAC 18 bits (VGA) + Wifi

Publicado: 21 Feb 2018, 00:21
por antoniovillena
Yes. It's normal. If you configure a spectrum core as secondary core it won't boot automatically. You must choose manually the core with Bloq MayusCaps Lock. This is because when the core is in the FPGA it doesn't know if it's the primary or the secondary one. It asumes it's the primary one and try to boot himself indefinitely. The only way to boot this core at default is being the primary one.
SevenFFF escribió:
yombo escribió:Good luck :ordenata:
I needed it!

I updated CORE31.ZX1 with this. Is it the correct core?

Now it doesn't boot. I get a repeated bios boot screen screen and red LED, every 5 secs. There is no error message.

It's the first time I updated an alternate core, but it said it worked successfully. How can I troubleshoot this?

My main core is EXP25 and bios is 0.64.

Re: DAC 18 bits (VGA) + Wifi

Publicado: 21 Feb 2018, 00:30
por SevenFFF
Thanks Antonio! I didn't know that. Now it boots, with Caps Lock :)